PS3048
216W -48 VDC Power Supply |
The model PS3048 is a high performance, 216 Watt power supply and
controller for the model CH3000 chassis. The PS3048 accepts a nominal DC input
voltage from -36 volts to -76 volts and outputs 12 volts DC to the power bus of
the CH3000 mid-plane. Power supply operational features include hot swap capability,
load sharing for redundant operation, overvoltage and short circuit protection and
thermal shutdown protection.
The PS3048 is available in two configurations, the model PS3048D with
alphanumeric display and the model PS3048N without display. The PS3048 dual-width
module occupies two full-depth chassis slots and is shipped with model BP-P2
dynamic back plate and power cord.
The PS3048 functions as the chassis controller and permits the network
operator to set alarm parameters for key functions of all active modules, to read
status of these key functions and to query alarms. On the model PS3048D these
functions are accomplished with a front panel alphanumeric display and control switch
or via a serial communications (craft) port. On the model PS3048N, which includes
alarm LEDs, these functions are performed via a front panel serial communications
(craft) port.
To simplify installation, setup and maintenance of Aurora Networks’
CH3000 chassis, auto discovery of installation or removal of all active modules is
performed by the PS3048.
Features
• 216 Watts
• Two packaging options, with or without display:
• Alphanumeric display (D version)
• Status LEDs (N version)
• Input voltage -36 to -60 VDC
• Hot swap and load sharing functionality
• Thermal shutdown protection
• Bellcore, UL and FCC compliant
• Front or rear plug-in
• Occupies two full-depth slots
|
